Service

Dear Tinger ATV Owners!

For maintenance and repair services you may contact our authorized Tinger dealer centers.

Here you will find the list and schedule of maintenance & repair services.

Work title/ Frequency of maintenance operation	Before/ after every trip	MO-1 10-20 r/h	MO-2 50 r/h	MO-3 100 r/h	MO-4 200 r/h
Check of the tracks tension	•
Check of drive chains tension	•
Check of cooling fluid level	•
Check of fuel level	•
Check of accelerator handle operation	•
Check of steering wheel play	•
Check of the flow of inlet and exhaust engine systems	•
Check of availability of drain plugs	•
Check of engine oil level	•
Check of hand brake	•
Check of power supply, headlights, wire harness, horn (if any)	•
Change of engine oil and oil filter		•	•	•	•
Check of transmission oil		•	•	•	•
Change of transmission oil		•		•	•
Clean of prefilter*		•	•	•	•
Change of fuel filter				•	•
Service of drive and driven CVT					•
Lubrication of drive chains		•	•	•	•
Adjustment, cleaning, lubrication of drive chains				•	•
Lubrication of inner and outer bearings		•	•	•	•
Tightening of fastening bolts and nuts (of all units)		•	•	•	•
Check of wire harness		•	•	•	•
Check and charging of accumulator battery**		•	•	•	•
Cleaning, lubrication, covering of leads and contacts of accumulator of battery				•	•
Cleaning, adjustment/replacement of spark plugs		•	•	•	•
Check of drive belt		•	•	•	•
Check of plastic cams — driven CVT				•	•
Check of stretcher – system chain tension		•	•	•	•
Examination of brake pads. If it’s necessary — replacement		•	•	•	•
Preventive measures (cleaning, lubrication) of brake calipers				•	•
Check of level and condition of hydraulic fluid of brake and steering		•	•	•	•
Check of connections/piping of fuel bank		•	•	•	•

Work title/ Frequency of maintenance operation	Before/ after every trip	MO-1 10-20 r/h	MO-2 50 r/h	MO-3 100 r/h	MO-4 200 r/h
Check of the tracks tension	•
Check of drive chains tension	•
Check of cooling fluid level	•
Check of fuel level	•
Check of accelerator handle operation	•
Check of steering wheel play	•
Check of the flow of inlet and exhaust engine systems	•
Check of availability of drain plugs	•
Check of engine oil level	•
Check of hand brake	•
Check of power supply, headlights, wire harness, horn (if any)	•
Change of engine oil and oil filter		•	•	•	•
Check of transmission oil		•	•	•	•
Change of transmission oil		•		•	•
Clean of prefilter*		•	•	•	•
Change of fuel filter				•	•
Service of drive and driven CVT					•
Lubrication of drive chains		•	•	•	•
Adjustment, cleaning, lubrication of drive chains				•	•
Lubrication of inner and outer bearings		•	•	•	•
Tightening of fastening bolts and nuts (of all units)		•	•	•	•
Check of wire harness		•	•	•	•
Check and charging of accumulator battery**		•	•	•	•
Cleaning, lubrication, covering of leads and contacts of accumulator of battery				•	•
Cleaning, adjustment/replacement of spark plugs		•	•	•	•
Check of drive belt		•	•	•	•
Check of plastic cams — driven CVT				•	•
Check of stretcher – system chain tension		•	•	•	•
Examination of brake pads. If it’s necessary — replacement		•	•	•	•
Preventive measures (cleaning, lubrication) of brake calipers				•	•
Check of level and condition of hydraulic fluid of brake and steering		•	•	•	•
Check of connections/piping of fuel bank		•	•	•	•

* During operation of the ATV in dusty areas, the manufacturer recommends to change the air filter every 10 running hours;

** Checking and charging of the Battery is carried out in accordance with the battery maintenance instructions.

Service

Search